Load Dog Fully Loaded!$ 4,800.00
The Economy Edition comes with 2 hydraulic pull cylinders and can still pull any 2 corners down at a time.
The standard asphalt edition comes with 3 hydraulic pull cylinders.
The Dirt Dog comes with 2 hydraulic pull cylinders and a push-up shock to replace the LR shock.
The Complete Edition comes with 3 hydraulic pull cylinders and a push-up shock so you can truly pull any car, dirt or asphalt down! Included with the 3 pull cylinders and push-up shock for dirt cars, a Rear end laser attachment with a laser!
ALL Load Dogs come with a full set of WBP 14″ roll-off stands. Proform wireless scales are also available on any version of the Load Dog for $800.
Air over hydraulic pumps
Works on any wheelbase and tread width
8″ travel front, 6″ travel rear
Use your scale pads or purchase new Proform scales for $800.
Roll off stands available for any height scale pad
Pull down rigs are the new gotta have, go fast tool. While pull down rigs are very useful, they are not an absolute necessity to go fast. We’ve produced a pull down rig that does the job without breaking the budget. The PDR allows you to quickly measure dynamic cross/camber/caster/wheelbase/tread width/Front and Rear geometry and check for binds in your shop or even at the track. Do your setup work on the included roll off stands to speed up the process.
All that is needed is travel data for your particular setup and track and the PDR will give you accurate, affordable information.
the WBP pull down rig has the racer in mind. It has the best value on the market, utilizing simple hydraulics the WBP PDR will travel your vehicle to any position desired. This is achieved by using 3 cylinders(2 front, 1 on RR). Additional bracketry may be required to “lift” your rear suspension to simulate lateral forces or rear end drive forces. Scale stand boxes come with removable roll offs and all stands have adjustable leveling feet.
The PDR will tell you your vertical wheel loads at any position of your travel on the track. Ideally you would use a data acquisition system to
The PDR now has hangers built to ease the movement of the longitudinal bars when they are positioned outside of the scale stands. The roll offs also now have a quick lock system to allow easy removal when needed. Wheel chalks have also been added to the LR box. Options are available for 1.875″, 2.5”, 3”, 4” scale pad heights. We have left this option open to the racer. We have been using 1800 lb scales and that would be OK for a dirt car or an asphalt car.